If the Renegade is so great, what do you get in the Renegade Plus?
First, the similarities. You get the same M-LOK compatible Renegade rail, heat sink barrel nut, Dictator 9-position adjustable gas block with straight gas tube, and 16.5” nitride heat treated barrel.
What really sets the Renegade + apart is the Gen 4 POF-USA billet lower receiver and POF-USA Ultimate Bolt Carrier Group. This receiver is completely ambidextrous and includes our flat 3.5lb match grade trigger with KNS Precision anti-walk pins – match ready right out of the box. The magic in the upper receiver is held within our Ultimate Bolt Carrier Group. NP3 coated for maximum protection & reliability, integrated gas key (no screws required) and the POF-USA Roller Cam Pin upgrade installed from the factory.
If there ever was a direct impingement rifle that exceeds all expectations, the Renegade + is it.
BUILT ON OUR GEN 4 LOWER RECEIVER
Ambidextrous Bolt Release with Enhanced Bolt Catch
Ambidextrous Safety Selector
Receiver Tension Screws
Oversized Mag Well Flare
Ambidextrous Recessed Finger Rest
Ambidextrous Magazine Release
Oversized Integrated Trigger Guard w/ Grip Relief
Ambidextrous Bolt Hold Open
Available QD Rear Sling Mount
E2 DUAL-EXTRACTION TECHNOLOGY
POF’s patented E2 dual-extraction technology consists of four small channels cut into the walls of the chamber allowing a small amount of gas pressure to push against the neck of the spent case. This pressure assists in extraction by breaking the seal between the chamber and case as well as pushing the spent case to the rear as the extractor is pulling to the rear. This removes a tremendous amount of work that would otherwise be left up to the extractor.
DICTATOR ADJUSTABLE GAS BLOCK
The DIctator Adjustable Gas Block lets you tune your rifle to the exact operating speed it should be. When your rifle runs too slow, or too fast, it’s more prone to failures. With the DIctator’s 9 adjustable settings and included straight gas tube, you and your rifle are set for just about any situation. So go ahead and suppress it, run different ammo, or don’t. Experience a smoother shooting rifle than ever before. To adjust, use a flat head screwdriver or the included tool.
NITRIDE HEAT TREAT BARREL
Proper gas regulation and lubricated mechanics are nothing without the precision and durability of a quality barrel. Our chrome alloy barrels are machined for absolute accuracy. Our barrels are nitride heat-treated for full corrosion resistance.
TRIPLE PORT MUZZLE BRAKE
Designed to precisely compliment the POF platform our nitride heat-treated muzzle brake controls gas dispersion and reduces muzzle rise. It is effective in allowing the shooter to have faster follow up shots and has unbelievably soft felt recoil. It features blunt strike prongs and includes our nitride heat-treated collar jam nut..
Ultimate BOLT CARRIER GROUP
Our one piece NP3 plated bolt carrier is manufactured with the mechanical key built into the body and positioned behind the cam pin. This patented design helps reduce carrier tilt. Our bolt carrier group features a chrome plated bolt, extractor, and firing pin. The finishes are both corrosion resistant and introduce lubricious characteristics to the action.
Roller Cam Pin
Our patented roller cam pin is just one more example of how we strive to reduce friction and drag in the action. Standard AR cam pins feature a square steel head that literally grinds and carves away at the inside of the receiver. POF’s NP3 coated roller head actually rolls inside the channel of the upper thus eliminating friction and prolonging the life of the upper.
Complete modularity of the Renegade and Renegade Plus is achieved by the 14” Renegade Forend. Sleek and rugged mounting system, lightweight, and QD mounts in all the right places – 2 per side. Add to that M-LOK® compatibility on 3 sides and a cut out to easily adjust the DIctator Adjustable Gas Block and your new Renegade rifle is ready to defend, compete, or hunt.
HEAT SINK BARREL NUT
Heat is an enemy to firearms. The patented heat sink barrel nut is one of the most significant innovations in battling overheating. It completely encompasses the chamber and throat area of the barrel where expanding gas temperatures peak. Take into account the radiation properties of aluminum compared to traditional steel and you have 17 times more heat dissipation than a standard AR. This also adds a massive amount of rigidity to the overall platform and is critical when vertical fore grips are being pulled on the upper assembly.
ANTI-TILT BUFFER TUBE
Our mil-spec aluminum anti-tilt buffer tube features “carrier cradle” extensions to ensure that the carrier is always supported by the buffer tube even when the bolt carrier is fully forward. This prevents carrier tilt and premature wear of the buffer tube. The buffer detent now doubles as a lock that inhibits the buffer tube from rotating and becoming loose under adverse conditions. The anti-tilt buffer tube also features three drain holes
DROP IN FLAT TRIGGER SYSTEM
The flat-face single stage, non-adjustable drop-in trigger boasts a crisp 3.5 pound pull weight, red aluminum housing, and urethane feet for immediate competition, hunting, and tactical applications. Wire EDM cut from American A2 tool steel the trigger, disconnect and hammer are all nitride heat-treated for ultimate strength and corrosion resistance. All POF triggers come with KNS Precision stainless steel non-rotating anti walk pins specifically designed for our ambidextrous lower receivers.
TOMAHAWK AMBIDEXTROUS CHARGING HANDLE
How can you say it’s a premium rifle without complete ambidextrous features? That’s where the Tomahawk Charging Handle comes in. Big enough for positive traction and small enough to stay out of the way, the Tomahawk rounds out the ambidextrous controls for the Renegade Plus.
- Category : Rifles Centerfire Tactical
- Action : Semi-Automatic
- Caliber : 223 Remington/5.56 NATO
- Barrel Length : 16.5"
- Capacity : 30+1
- Trigger : Match Grade
- Safety : Lever
- OAL : 33.5"
- Weight : 6.4 lbs
- Stock Description : Synthetic Black
- Metal Finish : Black Hard Coat Anodized
Renegade for life.
By far the best AR rifle I have ever purchased. The price may be in the mids but you'll get more then what it's worth. In terms of accuracy, reliability and durability. Truly a real competitor with the top brands.
New Industry Standards
Through innovation and insight POF has created a monster!! Looking forward to new advancements down the line.
Estimated shipping times are posted on the product information page under the title "Ships On Or Before:" please note that all lead-times are estimates. For items in our warehouse, we usually ship within 3 business days. For items only available at distribution or other sources, the ship time may be up to 10 business days. For items only available at the manufacturer, the lead-time may be a few weeks or longer-- depending on availability.
Please also note that some items are unique, hard to obtain, or one-of-a-kind, so Impact reserves the right to cancel your order should an item not be available to ship.
We will not charge your credit card until your product ships, except for certain special orders.
We normally will ship FedEx and US POSTAL. If you need faster shipment, we can ship 2nd Day or Next Day for an extra charge.
Alaska and Hawaii residents - your order MUST ship 2nd day or faster. Most orders over $100 value will ship with a signature-required to ensure they make it to you. Products that have free shipping only applies to the lower 48 states.
NOTE: We make every effort to get your order shipped as fast as possible. In some circumstances, especially during sales and after weekends, we may not get your order shipped in the time specified. Please rest assured that we will ship your item as soon as we can.
We want you to be 100% satisfied with your purchase from Impact Guns, therefore we offer no hassle returns.
How do I start the return process?
- Log in to your www.impactguns.com account and locate and click on the "Request Return" link.
- An Impact Guns agent will review your request for a return and respond within two business days.
- All returns are subject to inspection and approval prior to refund being issued.
- All products need to be in new and original manufacturer condition.
- As an alternate method, you can send an email to firstname.lastname@example.org. Please be sure to include your original order number and relevant contact information.
When will I get my credit or return?
- Most returns are fully refunded in 3-5 days after we receive and process the return. It may take longer for the credit to appear in your account depending on your bank. Most items that are in stock ship within 3-5 days after receipt of your returned item but may take longer depending on availability.
- Returns must be charged back to the original credit card used in the purchase. If this is not possible, we will refund you via check.
What about damaged/incorrect items?
- If you received a damaged, defective, or incorrect item, Impact Guns will ship you a replacement of the exact item upon receipt of the damaged or defective item. Impact Guns will send you a return shipping label for the return.
What about return shipping costs?
- If an Impact Guns error causes the need to return an item or we are replacing a returned defective or incorrect item, then we will pay the associated shipping costs.
- Otherwise, the customer is responsible for any return shipping costs. When returning an item, please add package tracking and adequate insurance.