Lee Carbide 3-Die Set 7.62 Nagant

The 3-Die Steel Set includes a powder through expanding die for charging the case with funnel or Lee auto disk powder measure and seater die with built in crimp. The Steel 3-Die Set for handgun calibers consists of a full-length sizing die (requires case lubrication), a powder through expander die, and a bullet seating die. It includes a Universal Shell Holder, Powder Dipper, and Instructions all packaged in a fitted storage box.*
*No load data is included with this set. This caliber was originally loaded to about 850 feet per second and the original bullet diameter was .306". These dies have been adjusted to work with brass which has a wall thickness ranging from .010 to .012 thick. This means when resized the case will hold tight a .306" diameter bullet that has been pushed in flush with the mouth of a 38mm case, (1.496" long case). Brass made in the U.S. for the .32-20 cartridge can also be used, but when the case wall is less than .008" thick the bullet may not be held tight in the case. The case mouth is reduced in size by being squeezed down by the hole diameter in the die. The thicker the brass wall, the smaller the neck inside diameter.

---

• Category : Dies
• Type : Steel 3-Die Set Pistol
• Caliber : 7.62 Nagant
• In Set : 3
• Metal Type : Steel
• Shell Holder : Included