Magpul Bipods

A Magpul bipod gives a rifle a steady front rest for the bench, a field position or a prone shot, and Magpul makes one for nearly every rail or stud style. Impact Guns, an authorized Magpul dealer, lists M-LOK, 1913 Picatinny, A.R.M.S. 17S style, MOE, MOE QD and sling stud QD bipods, plus an M-LOK bipod mount. This guide explains how each one attaches, how far the legs extend and which suits your rifle.

Read our full Magpul Bipods Buying Guide ↓

How Magpul Bipods Mount: M-LOK, Picatinny, Sling Stud and A.R.M.S.

Start with the mount, because it decides which bipod you can use. Magpul lists a bipod for M-LOK slots, one for 1913 Picatinny rails, one for A.R.M.S. 17S style mounts, and sling-stud bipods that attach to a standard sling swivel stud. The MOE QD Bipod for M-LOK attaches directly to the slots without a separate adapter, and Magpul describes the installation as insert, rotate and tighten. Check your handguard or rail before you order, because a bipod for one mount will not fit another.

M-LOK, 1913 Picatinny and A.R.M.S. 17S Style Bipods

These three share the same design. Magpul lists legs that extend from 6.8 to 10.3 inches in seven detents with a push-button release, a tool-less knob that sets 50 degrees of tilt and 40 degrees of pan, and a body that can be rotated to lock pan at zero while keeping tilt. The housing is low profile to reduce snags, and the legs are spring-tensioned so they stow forward and snap down with one hand. Magpul builds them from hard-anodized 6061-T6 aluminum, stainless steel and reinforced polymer with removable staggered rubber feet, and the feet accept most Atlas-pattern replacements except 5-H. Magpul lists them at about 11 ounces. Choose the M-LOK bipod for an M-LOK handguard, the 1913 Picatinny version for a Picatinny rail or the A.R.M.S. 17S style bipod if your rifle already has that mount.

MOE and MOE QD Bipods

The MOE Bipod is Magpul’s lightweight polymer bipod, which Magpul describes as lightweight, affordable, rugged and stable. It weighs just over 8 ounces, extends from 7 to 10 inches in half-inch steps with seven locking detents, folds to a stack height of 1.73 inches and mounts to a standard sling swivel stud. The MOE QD Bipod for M-LOK attaches to M-LOK slots, has a similar 7 to 10 inch range, and Magpul lists it at 9 ounces. Neither MOE model includes the pan and tilt control of the larger aluminum bipods, so pick it for a simple, light front rest. Our listings include black and Flat Dark Earth.

Sling Stud QD Bipod and the M-LOK Bipod Mount

The Sling Stud QD Bipod is the Magpul bipod for rifles that have a sling swivel stud. Magpul calls it “the most versatile sling stud bipod available,” lists the same 6.8 to 10.3 inch leg range and 50 degrees of tilt, and describes a stainless-steel mounting system that fits most traditional sling studs. If you want to put a stud-mount bipod on an M-LOK handguard, the M-LOK Bipod Mount adds a sling stud to M-LOK slots. Magpul says it is machined from anodized aluminum, mounts to polymer or aluminum M-LOK handguards and works with the MOE QD, Sling Stud QD and most Harris-style bipods. See Magpul M-LOK for more M-LOK gear.

Matching the Bipod to Your Rifle

Think about where you will shoot. For a hunting or range rifle with an M-LOK handguard, the M-LOK or MOE QD bipod is the direct fit. For a Picatinny rail, use the 1913 bipod. For a sling-stud rifle or a stock with a stud, use the MOE or Sling Stud QD. Leg length matters too: with a rifle and optic height, a 6.8 to 10.3 inch range suits most bench and prone positions, and the 7 to 10 inch MOE range is similar. See Bipods, Tripods & Monopods for other brands and AR-15 Handguards & Rails for rail options.

Frequently Asked Questions: Magpul Bipods

What Magpul bipods are available?
Our listings include M-LOK, 1913 Picatinny, A.R.M.S. 17S style, MOE, MOE QD for M-LOK and sling stud QD bipods, plus an M-LOK bipod mount.

What is the difference between the Magpul M-LOK bipod and the MOE QD bipod?
The M-LOK bipod is the aluminum, stainless steel and polymer model with 50 degrees of tilt and 40 degrees of pan. The MOE QD is a lighter polymer and steel bipod without pan and tilt.

How tall is a Magpul bipod?
Magpul lists 6.8 to 10.3 inches for the M-LOK, Picatinny, A.R.M.S. 17S style and sling stud QD models, and 7 to 10 inches for the MOE bipods.

How much does a Magpul bipod weigh?
Magpul lists about 11 ounces for the M-LOK, Picatinny and A.R.M.S. 17S style models, just over 8 ounces for the MOE, 9 ounces for the MOE QD for M-LOK and just over 13 ounces for the Sling Stud QD.

Will the Magpul MOE bipod fit an M-LOK handguard?
The MOE Bipod uses a sling stud. Magpul lists a separate MOE Bipod Adapter for M-LOK, and our M-LOK Bipod Mount adds a sling stud to M-LOK slots. The MOE QD Bipod for M-LOK attaches directly.

Can I change the feet on a Magpul bipod?
Yes. Magpul lists removable rubber feet that accept most Atlas-pattern replacement feet; the M-LOK, Picatinny, A.R.M.S. and Sling Stud models exclude 5-H.

Is a Magpul bipod made in the USA?
Magpul says its bipods are made in the USA.

Browse Magpul Bipods: Bipods, Tripods & Monopods • AR-15 Handguards & Rails • AR-15 Accessories • Slings & Swivels

See Also: Magpul • Magpul PMAGs • Magpul Stocks • Magpul Grips • Magpul M-LOK • Magpul Handguards • Magpul Slings • Magpul Sights • Magpul Apparel • Magpul DAKA • Magpul Bags and Packs