Best selection of Ruger

Federal Ammunition
Recently Viewed
AK-47 Scout Mount Style 1, No Vent Holes

AK-47 Scout Mount Style 1, No Vent Holes

AK-47 Scout Mount Style 1, No Vent Holes
For AK type rifles that have original gas tubes without side gas port holes. No Gunsmithing. Easy Install
ITEM #: 100000497
AK "scout" mount Model M1-B  Picatinny/Weaver style rail.

Low Mount Lets You Use Optics Or Iron Sights

Lightweight, aluminum mount replaces the gas tube to maintain scope alignment and improves stability to prevent shifting zero. Clamps solidly to barrel. Weaver-style base sets below the line of sight, no need to remove mount to use iron sights. Issue sights can be viewed directly through the red dot and reflex scopes.

UltiMAK M1-B-- A rock-solid platform for your premium optics. With the increasing popularity of the AK based rifles in three gun competitions, the need for a handy, light, completely reliable high speed sighting system has resulted in the UltiMAK M1-B optic mount. Its Picatinny style rail is positioned well below the iron sight axis, making this the lowest optic mount available for the AK. With a tubular sight mounted low, you will be able to use your optic without a comb riser and still use your regular hold. The system allows for co witnessing (the ability to use your iron sights right through a 1x sight as a back-up sighting system) when used with a tubular reflex sight. This heavy duty mount replaces the original steel gas tube and upper handguard, so it adds less than one ounce to the weight of the rifle, making it by far the lightest optic mount installation in the world. The forward positioning of the optic gives you faster, easier and more natural targeting while maintaining your full field of view. Multiple target or moving target engagements, with both eyes open, become second nature. 

Note: Romanian Small Bore AKs Only: Romanian 5.45 and 5.56 mm caliber AKs require our shim set SH-1 to match the M1-B to the smaller barrel. Other European and Chinese small bores will NOT need the shims. 

The UltiMAK AK optic mount rarely if ever needs to be removed to clean the rifle, so you need not worry about loss of zero. Since the mount is clamped to the barrel and not jammed in between the gas block and the sight block like the original gas tube, several UltiMAK users have reported an improvement in their AKs' inherent accuracy. 

Shown here the M1-B is installed on an Egyptian rifle with a Choate Dragunov style stock.

This Item Is No Longer Available.
Chat/Email/Call For Price

Security Seals